Pinpoint Laser Microgage 2D Alignment And Measuring System (Used) - Sale!

The Microgage 2D laser alignment tool can be adapted to a wide variety of industrial measuring and alignment requirements. Each receiver measures in two axial directions (X & Y) and can be used for checking straightness, flatness, parallelism, squareness, bores, spindles, and other alignment needs.

How It Works?

Capture precise measurements as small as 0.0001 inch (2.5 micron). The easy to use Microgage 2D laser transmitter and electrical receiver can be separated by a few inches up to 150 feet for large industrial projects. A highly collimated, low power laser beam is projected from the end of the laser housing. The electronic receiver picks up the laser beam allowing the display to provide a digital readout showing the height and lateral position of the laser beam. If the laser transmitter and receiver are resting on a common flat surface, the display will read zero. If the transmitter or the receiver is then raised off the surface, or moved side to side, the differential position will then be displayed. Combining the laser and receiver with various optics and mounting accessories allows the Microgage laser alignment tool to measure all sorts of two dimensional alignment parameters.

The Microgage 2D begins with a basic laser alignment kit that is compact, versatile and easy to use. Adding various precision alignment accessories and attachments expands the capabilities of the Microgage 2D to address virtually any industrial measuring and alignment application.

2D Display

Large LCD readout

The digital data of the laser’s position will read “0” for height & lateral readings if laser & receiver rest on the same plane & against a straight guide rail.

If the receiver is moved, the measurement readings will change accordingly.

On-board microprocessor stores up to one thousand measurement readings.

Durable enclosure

Runs on two C batteries (20 hour run time).

Capture Software

Capture will work and can be purchased to use with the Microgage 2D.

Capture is our Windows-based, proprietary alignment software.

Displays readings in large numerals and with graphical X/Y and moving chart plot.

Provides real-time measurement data in a customizable Excel format.

Analyzes industrial equipment and production machinery performance and alignment.

Works with up to 8 receivers.

Pre-installed routines and built-in instructions allow Capture™ to interface seamlessly with other packages and programs.

Digital Receiver

Compact optical receiver

Available in 1-inch, 0.75-inches, 0.5-inches, and 3 inches

Machined from durable aluminum

Convenient built-in mounting points

Built to withstand years of industrial use

2D Components

3 primary components: Laser transmitter, receiver & display

Specific application components:

90 Line Beam Benders

Cylindrical Lasers

Transparent Receivers

4 Axis Receivers

Wireless Receivers

2D Applications

Measures most machine geometries

Straightness, Flatness, Parallelism, Squareness, Bores, Spindles, and many others.

Equipment installations, repair, maintenance applications, and much more.

2D Customization

Custom receiver housing units

Laser housings

Laser light sources

OEM sub-systems

Software

Specifications :

Measuring System:

Measurement Resolution: 0.0001 inch (2.5 micron)

Measurement Range: ±0.350 inch dual axis X-Y ± 0.5” single axis (±9mm or ±13mm)

Operating Distance: 0 to 150 feet standard (> 150’ optimized)(45 meters)

Measurement Accuracy: ±0.0002 inch or 1% of measurement (5 micron)

Laser Characteristics:

Laser Source: Laser Diode, 635 Nm, < 1mW, Class IIIA (Class II Available)

Laser Beam Accuracy: < 2 arc-seconds

Laser Beam Repeatability: < 1 arc-second

Laser Level: Bubble, machinists level < 10 arc-second

Laser Power: 4 AA-Alkaline batteries

Laser Run Time: > 20 hours per battery set

Laser Controls: On/Off switch, laser on, low battery

Laser Dimensions: 8” long x 2” wide x 3” high (203mm x 51mm x 76mm)

Laser Mounting Points: 1/4-20 and 10-32 mounting holes

Laser Housing: Solid machined aluminum & hard anodized coating

Receiver Characteristics:

Active Detection Area: .750 inch x .750 inch (19mm x 19mm)

Protective Window: Bandpass filter, metallic coating

Receiver Dimensions: 2.00” high x 2.00” wide x 2.00” deep (51mm)

Receiver Mounting: 1/4-20 and 10-32 mounting holes

Receiver Cable: 10’ long, reinforced cladding, black

Display Characteristics:

Display Unit: Multi, dual-axis processing system

Display Inputs: Up to 4 dual-axis receivers at one time

Display Screen: LCD graphic screen 5.0” x 3.0” (127mm x 76mm)

Display Controls: Keypad, zero, function, multi-purpose keys

Display Information: X/Y data, signal, functions, alignment steps

Display Units: Inch, MM, Mils, Custom

Display Resolution: 0.0001 inch (2.5 micron)

Display Processing: Multiple user programs for alignment

Display Connections: 4 Receiver inputs, USB, Aux, Serial

Display Interface: USB & Serial RS232c

Interface Communication: Pinpoint Capture (Windows-based)

Display Power: 2 C-cell Alkaline

Display Run Time: >30 hours per battery set

Display Housing: Solid machined aluminum & hard anodized coating

Display Housing Design: Flip-up display, reversible handle

Display Housing Dimensions: 12” long x 5”wide x 2”high (305mm x 127mm x 51mm)

Operating Conditions: 30 degree to 130 degree F (–10 degree to 55 C), Humidity 0–95%, non-condensing.

Includes:

Laser Transmitter

Digital Receiver

Portable Display Unit

Adjustable Mounting Hardware

Operations Manual

Batteries

Carrying Case

Included with all kits

Every kit we offer includes these standard accessories and support packages.

• Availability: In Stock
• Model: Microgage 2D
• Brand: