Pruftechnik Vibxpert EX Vibration Analyzer and Data Collector (Used) - Sale!

VIBXPERT EX records all types of machine vibrations, bearing conditions as well as process and visual inspection data, and transfers this information to the OMNITREND maintenance software for evaluation, archiving and documentation.

The combination of its extensive range of features and easy operation makes VIBXPERT EX the effective choice for a wide range of applications:

o High measurement accuracy and high-speed data collection

Operating modes:

-   'Route' for routine data collection for condition-based maintenance,

-   'Multimode' for individual measurements for machine diagnosis

-   'Balancing' in one or two planes (optional).

-   'Machine templates' for recurrent measurement tasks within the scope of acceptance or service measurements

o Almost every type of sensor can be connected

o One or two measurement channels (analog); Upgrade to 2-channel device at any time via password.

o Intrinsic safety approved for zone 1

Hardware

-   Two synchronous measurement channels for diagnosis of complex measurements (e.g. shaft vibration).

-   Unlimited storage capacity (Standard: 2 GB CompactFlash).

-   Three alarm LEDs (red-yellow-green) indicate if thresholds have been exceeded (based on ISO standards). A blue LED lights up if everything is OK.

-   Daylight sensor controls keyboard illumination

-   Dustproof and splashproof (IP65) - ideal for use in demanding industrial environments

-   Connector technology compatible to VIBSCANNER (same cable)

-   Connector for NiCrNi thermocouples

-   Connector for headphones

Data collection and data analysis

-   Overall values

-   Vibration acceleration, velocity, displacement

-   Current & voltage (process parameters)

-   Shock pulse (bearing condition)

-   Temperature

-   RPM

-   Signals

-   Frequency-based and order-based data collection

-   Amplitude, envelope, order spectra

Input

Analog, Vibration, 2x

Voltage (AC/DC, ±30 V max.)

Current (AC/DC, ±30 mA max.)

IEPE-type accelerometer (2 mA, 24 V max.)

Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)

Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)

Dynamic range 96 dB (measurement) / 136 dB (total)

Sampling frequency up to 131 kHz per channel

Analog, Temperature, 1x Thermocouple (type K)

Digital, Pulse/ Tacho, 1x RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V

Max. input voltage ± 26 V

Switching threshold for 0 V ... 26 V signal max. 2.5 V rising, min. 0.6 V falling

Switching threshold for -26 V ...0 V signal min. -8 V rising, max. -10 V falling

Pulse width < 0.1 ms

Output

Stroboscope control TTL output level

Frequency range 0 - 500 Hz

Resolution 0.05 Hz

Signal-Out Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)

Frequency range 0.5 Hz - 40 kHz

Output impedance 100 Ohm

Measurement range / Accuracy

Vibration acceleration depends on the sensor connected

Shock pulse -10 ...80 dBsv / ± 3dBsv

RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)

Temperature, type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)

Standards fulfilled Frequency response acc to ISO 2954

Display

Type LCD, backlit

Pixel area 115 x 78 mm [ 4 1/2" x 3 1/16"]

Resolution 1/2 VGA (480 x 320 pixel)

Color depth 16 grey scales

Power supply

Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)

Charging time < 5 hours in the instrument

Charger, input 110-240 V / 50-60 Hz

Charging temperature 0°C ... 50°C [ 32 °F ... 122 °F]

Computer

Processor Intel Strong ARM 206 MHz

Keyboard 2 joysticks and 12 keys for right-hand or left-hand operation. Keyboard illumination controlled by

ambient light.

Memory Internal: 64 MB RAM; Compact Flash: 1 GB or 4 GB

Serial interface RS 232, <115 kBaud

USB interface USB host for printing; USB slave for data exchange with OMNITREND

Ethernet interface 10 Mbit (10Base T), 10 Mbit (10Base T)

Environment / General

Connectors Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER

Housing Aluminium

Dimensions 250 x 220 x 37 mm [ 9 13/16" x 8 11/16" x 1 7/16" ] (LxWxH)

Weight approx. 2.3 kg [81 oz]

Environmental protection IP65, dust and splash-proofed

Temperature range -10°C ... 60°C (Operation), [ 14 °F ... 140°F]

-20°C ... 60°C (Storage), [ -4 °F ... 140°F]

Intrinsic safety details

Marking

II 2G Ex ib IIC T4

Temperature range -10 °C ... 60 °C

Package Includes:

- (1) VIB 5.300 EX VIBXPERT EX instrument

- (1) VIB 5.322 VIBXPERT EX charger

- (1) VIB 5.329-X VIBXPERT EX case

- (1) VIB 5.330-UNV Universal communication adapter

- (2) VIB 5.338 USB cable for VIBXPERT EX

- (1) VIB 5.354-LD VIBXPERT EX leather carrying strap

- (1) VIB 5.380-L 1-channel standard firmware certificate

- (1) VIB 5.382-L 2-channel standard firmware certificate

- (2) VIB 5.436 Spiral cable for line-drive transducers

- (2) VIB 6.142 DEX Accelerometer for standard machines, intrinsically safe

- (2) VIB 3.420 Magnetic holder for curved mounting surfaces

- (1) VIB 9.805.G VIBXPERT manual

- (1) LIT 53.101.EN VIBXPERT EX short instructions

- (1) VIB 9.806.G VIBXPERT balancing manual

- (1) LIT 01.800 CD ROM, Condition Monitoring catalogs, brochures, magazines

- (1) VIB 8.981 CD ROM, OMNITREND for VIBXPERT, PC software

- (1) VIB 9.631.G OMNITREND getting started

- (1) VIB 8.115 OMNITREND web, single user certificate

- (1) VIB 8.981-P PC licence for VIBXPERT EX

- (1) 0 0594 0219 EC-type Examination Certificate - ATEX - VIBXPERT EX

- (1) 0 0594 0221 Technical data sheet, UNV communication adapter

• Availability: In Stock
• Model: Vibxpert EX
• Brand: