Digitrak Falcon F5 Locator System (New) - Sale!

Falcon F5 Is Now Passive Aggressive
The ability to choose the right transmitter frequency is more important than power in overcoming the effect of active interference. In October of 2015, DCI introduced Falcon technology, a significant new approach to overcoming active interference on HDD jobsites. DCI now introduces a new approach to addressing the problem of passive interference: subkilohertz frequencies. Falcon F5 with Sub-k™ Rebar capability allows a locating specialist to scan the jobsite and select the best frequency in the ultra-low frequency range of 0.33–0.75 kHz to combat passive interference.

Falcon Innovation Continues
Falcon is the HDD industry’s only walkover guidance system able to specifically address both active and passive interference.
Transmitter frequencies below 1 kHz are proven most effective for jobsites where passive interference is a problem. In addition, the new Falcon F5 receiver supports Full Scale Sensitive Pitch (FSSP) for 0.1% resolution through ±99.9% slope for precision grade work.
The Falcon F5 receiver offers the industry’s first fully integrated GPS capability using the DigiTrak iGPS module. Snap on the iGPS module and it automatically powers on to receive and record satellite GPS data.
Use the free LWD Mobile app to view the progress of the bore and overlay the iGPS locate points on your smart device.
Wideband technology evaluates hundreds of frequencies for the best possible performance around active interference Ultra-low frequency options for battling passive interference on the jobsite
Scan for interference, select optimum frequencies, and pair transmitter at the jobsite
Switch between paired bands mid-bore
Full Scale Sensitive Pitch provides 0.1% resolution through ±99.9% slope for precision grade work
Max Mode filters noise to boost weak data signals and stabilize depth readings
Standard warranty for 19" and 15" transmitters is 3 years/500 hours

The Falcon F5 Wideband Transmitter
A Falcon F5 transmitter provides versatility in all types of active interference at frequencies of 4.5–45 kHz. The Falcon F5 wideband design vastly outperforms single-frequency transmitters of past generations. It also comes standard with fluid pressure measurement. No other guidance system allows an operator to scan for active interference and then pair optimized frequencies to a transmitter at every jobsite. This provides substantial cost savings and increases pilot bore productivity.

The Falcon F5 Sub-k Rebar Transmitter
The newest entrant into the Falcon F5 wideband transmitter lineup is the Sub-k Rebar transmitter. It uses frequencies below 1 kHz and provides frequency selection options from 0.33–0.75 kHz. This frequency range is ideal for addressing project scenarios that exhibit passive interference. Whether sidewalk, roadway, or runway, the Sub-k outperforms other options above 1 kHz. These transmitters include fluid pressure measurement as a standard feature. 

• Availability: In Stock
• Model: Falcon F5
• Brand: